|
|
|
|
|
|
This kit includes a headlight with integrated blinkers, control box, handle bar switch, horn, hydraulic brake switch, AC line in, power harness and taillight harness. No stator modification is required.
We recommend using the stock WR taillight. If you want to use the UFO taillight*, you will need a 2003-2005 YZ fender. For '03-05 we recommend the removal of the odometer or 1in spacers have to be installed. For '06-'09 we recommend keeping the factory speedometer. |
This kit includes a headlight with integrated blinkers, control box, handle bar switch, horn, hydraulic brake switch, power harness, taillight harness, battery and voltage regulator.
We recommend using the stock WR taillight. If you want to use the UFO taillight*, you will need a 2003-2005 YZ fender. |
This kit includes a headlight with integrated blinkers, control box, handle bar switch, horn, mechanical brake switch, power harness and taillight harness.
Since this model does not have a stock rear taillight, it requires purchase of a rear taillight. We will build the rear tail harness to support the taillight and blinker system of the customer’s choice. We carry in stock the UFO taillight.*
|
Same kit as the WR 400/426 except a mechanical brake switch is used in place of the hydraulic brake switch: |
Since this model does not have a stock rear taillight, it requires purchase of a rear taillight. We will build the rear tail harness to support the taillight and blinker system of the customer’s choice. We carry in stock the UFO taillight.* |
Rear UFO taillight assembly complete with tail, brake and turn indicators and wiring harness. |
|
|
|
|
1. With our kit, there are only two wires to run which results in installation in under an hour.
2. Blinkers remove with the headlight.
3. Headlight with up to 55/60 watts DC and the ability to modify it further to exceed 110 watt DC.
4. An auxiliary port.
5. A battery condition indicator light.
6. Day, night and off mode.
7. A one year warranty.
|
|
|
|
|